HP ESA-E Series Programmer's Manual page 307

HP 8590-Series
Analyzers
Command(s)
DET
DET NEG [:SENSe]:DETector[:FUNCtion] NEGative|POSitive|
DET POS SAMPle
DET SMP
DET? [:SENSe]:DETector[:FUNCtion]?
DISPOSE
DIV
Corresponding SCPI Command(s) Description/Comments
Selects the spectrum analyzer detection mode.
Specifies the detection mode.
Negative peak detection displays the lowest
sample taken during the interval being
displayed.
Positive peak detection displays the highest
sample taken during the interval being
displayed.
Sample detection displays the first sample
taken during the interval being displayed.
The HP 8590-Series analyzer returns NEG,
POS, or SMP. The HP ESA analyzer returns
NEG, POS, or SAMP.
Deletes user-defined functions and frees
spectrum analyzer memory that was
previously allocated for user-defined operands.
The HP 8590-Series analyzer returns NEG or
POS. The HP ESA analyzer returns 1 or 0.
Divides source 1 by source 2 and places the
result in the destination.