HP ESA-E Series Programmer's Manual page 337

HP 8590-Series
Analyzers
Command(s)
ONEOS
ONMKR
ONMKRU
ONPWRUP
ONSRQ
ONSWP
ONTIME
OP
OUTPUT
PA
PARSTAT
Corresponding SCPI Command(s) Description/Comments
Executes the list of analyzer commands
after the end of the sweep.
Performs the list of analyzer commands
when the sweep reaches the marker
position.
Executes the list of analyzer commands
whenever the value or the units of the
active marker are changed.
Executes the list of spectrum analyzer
commands once on power up.
Executes the list of analyzer commands
whenever a service request occurs.
Executes the list of analyzer commands at
the beginning of the sweep.
Executes the list of analyzer commands at
the specified time.
Returns the coordinates of the lower-left
and upper-right corners of the spectrum
analyzer display (P1,P2).
Allows the spectrum analyzer to send data
to other devices on the HP-IB.
Moves the pen to a vector location on the
spectrum analyzer screen relative to the
reference coordinates (0,0).
Returns parallel port status.