HP ESA-E Series Programmer's Manual page 330

HP 8590-Series
Analyzers
Command(s)
MKP
:CALCulate:MARKer[1]|3|3|4:X:POSition <integer>
MKP? :CALCulate:MARKer[1]|3|3|4:X:POSition?
MKPAUSE
MKPK
MKPK HI :CALCulate:MARKer[1]|2|3|4:MAXimum
MKPK NL :CALCulate:MARKer[1]|2|3|4:MAXimum:LEFT
MKPK NH :CALCulate:MARKer[1]|2|3|4:MAXimum:NEXT
MKPK NR :CALCulate:MARKer[1]|2|3|4:MAXimum:RIGHt
Corresponding SCPI Command(s) Description/Comments
Places the active marker at the given
x coordinate.
The HP 8590-series analyzer outputs data in
the format: 200. The HP ESA series analyzer
outputs data in the format:
+2.00000000E+002.
Pauses the sweep at the active marker for the
duration of the delay period.
Positions the active marker on a signal peak.
Places the selected marker on the highest point
on the trace that is assigned to that particular
marker number.
Places the selected marker on the next highest
signal peak to the left of the current marked
peak.
Places the selected marker on the next highest
signal peak from the current marked peak.
Places the selected marker on the next highest
signal peak to the right of the current marked
peak.