HP ESA-E Series Programmer's Manual page 350

HP 8590-Series
Analyzers
Command(s)
SPEAKER
SPEAKER :SYSTem:SPEaker[:STATe] OFF|ON|0|1
ON|OFF
SPZOOM
:CALCulate:MARKer[1]|2|3|4:STATe OFF|ON|0|1
:CALCulate:MARKer[1]2|3|4:MAXimum
:CALCulate:MARKer[1]2|3|4:TRCKing[:STATe]
OFF|ON|0|1
SQLCH
[:SENSe]:DEMod:SQUelch <number>
SQR
SRCALC
SRCAT
:SOURce:POWer:ATTenuation <ampl>
:SOURce:POWer:ATTenuation:AUTO OFF|ON|0|1
Corresponding SCPI Command(s) Description/Comments
Turns the internal speaker on or off.
Places a marker on the highest on-screen
signal (if an on-screen marker is not
present), turns on the signal track
function, and activates the span function.
Sets the squelch level.
Sets the squelch threshold by setting the
squelch level.
Places the square root of the source into
the destination.
Selects internal or external leveling for use
with the built-in tracking generator.
Attenuates the source output level.
Selects if the source output level
attenuator will be set automatically.