Language Reference
SENSe Subsystem
Range:
50 or 75 ohms
Default Unit:
ohms
Front Panel
Input, Input Z Corr 50 Ω 75 Ω
Access:
External Amplifier Correction
[:SENSe]:CORRection:OFFSet[:MAGNitude]
<rel_ampl>
[:SENSe]:CORRection:OFFSet[:MAGNitude]?
A single value of amplitude correction can be applied to the displayed
trace data to compensate for signal losses or gains that are due to other
devices in the measurement setup, rather than the unit under test.
Factory Preset
and *RST:
0 dB
Range:
–81.9 to 81.9
Default Unit:
dB
Front Panel
Access:
AMPLITUDE/Y Scale, Ext Amp Gain
5-80
Chapter 5