HP ESA-E Series Programmer's Manual page 322

HP 8590-Series
Analyzers
Command(s)
LIMISEGT
:CALCulate:LLINe[1]|2:DATA:MERGe
<x-axis>,<ampl>,<connected>
{<x-axis>,<ampl>,<connected>}
LIMITEST
:CALCulate:LLINe[1]|2:STATe OFF|ON|0|1
LINFILL
:CALCulate:LLINe[1]|2:AMPLitude:INTerpolate:
TYPE LOGarithmic|LINear
LN
:DISPlay:WINDow:TRACe:Y[:SCALe]:SPACing LINear
Corresponding SCPI Command(s) Description/Comments
Adds new segments to the current sweep time
limit line in either the upper limit line or the
lower limit line.
<x> is frequency in Hz.
<ampl> is amplitude in dB.
<connected>: 1 = connected, and 2 = not
connected.
Compares trace A with the current limit-line
data.
Fills linear interpolated data into the specified
trace data points of a destination trace.
Specifies the vertical graticule divisions as
linear units, without changing the reference
level.
Specifies the vertical graticule divisions as log
or linear units.