HP ESA-E Series Programmer's Manual page 343

HP 8590-Series
Analyzers
Command(s)
RB
RB <value> [:SENSe]:BANDwidth|BWIDth[:RESolution] <freq>
RB AUTO [:SENSe]:BANDwidth|BWIDth[:RESolution]:AUTO
OFF|ON|0|1
RB UP|DN
RB? [:SENSe]:BANDwidth|BWIDth[:RESolution]?
RCLS
*RCL
RCLT
:MMEMory:LOAD:TRACe <label>,<file_name>
RELHPIB
Corresponding SCPI Command(s) Description/Comments
Specifies the resolution bandwidth.
Couples the resolution bandwidth to the
frequency span.
AUTO parameters ON|OFF are not
available for the HP 8590-Series spectrum
analyzers.
The HP 8590-Series analyzer outputs data
in the format: 750000000. The HP ESA
analyzer outputs data in the format:
+750000000.
Recalls spectrum analyzer state data from
one of nine state registers in spectrum
analyzer memory. These registers do not
appear in a FILE catalog.
Recalls previously saved trace data,
amplitude factors, or limit-line data from
the trace registers in spectrum analyzer
memory. These registers are specially
mapped to named files.
The contents of the file are loaded into the
specified trace. See the LOAD command.
Releases spectrum analyzer control of the
HP-IB.