HP ESA-E Series Programmer's Manual page 333

HP 8590-Series
Analyzers
Command(s)
MKTRACE
MKTRACE TRA :CALCulate:MARKer[1]|2|3|4:TRACe:AUTO OFF|ON|0|1
MKTRACE TRB
MKTRACE TRC
:CALCulate:MARKer[1]|2|3|4:TRACe <integer>
MKTRACE? :CALCulate:MARKer[1]|2|3|4:TRACe?
MKTRACK
:CALCulate:MARKer[1]|2|3|4:TRCKing[:STATe]
OFF|ON|0|1
MKTRACK? :CALCulate:MARKer[1]|2|3|4:TRCKing[:STATe]?
MKTYPE
Corresponding SCPI Command(s) Description/Comments
Moves the active marker to a
corresponding position in trace A, trace B,
or trace C.
Automatically puts markers at the same x
position on all the traces.
Assigns the specified marker to the
designated trace 1, 2, or 3.
The HP 8590-Series analyzer returns TRA,
TRB, or TRC. The HP ESA analyzer
returns +1, +2, or +3.
Moves the signal with an active marker to
the center of the spectrum analyzer display
and keeps the signal peak at center screen.
Turns marker signal tracking on or off. It
continuously puts the selected marker on
the highest displayed signal peak and
moves it to the center frequency. This
allows you to keep a signal on the display
that is drifting in frequency.
The HP 8590-Series analyzer outputs ON
or OFF. The HP ESA analyzer outputs 1
or 0.
Changes the type of the current active
marker.