HP ESA-E Series Programmer's Manual page 344

HP 8590-Series
Analyzers
Command(s)
REPEAT...
UNTIL
RESETRL
RETURN
REV
REV? *IDN?
RL
RL <value> :DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel <ampl>
RL UP|DN
RL? :DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel?
RLPOS
Corresponding SCPI Command(s) Description/Comments
REPEAT/UNTIL forms a looping construct.
Resets the reference level to instrument
preset value.
Stops the operation of a user-defined
command and returns program operation
to the point where the user-defined
function was called.
Returns the date code of the firmware
revision number in YYMMDD format.
The HP 8590-Series analyzer returns the
firmware revision number date code in the
format: 950129. The HP ESA analyzer
returns the format: Hewlett-Packard,
HP E4401B, US00000084, A.00.00.
Specifies the amplitude value of the
reference level.
Sets the amplitude value of the reference
level for the y-axis. The active window is
assumed when no window is specified.
The HP 8590-Series analyzer outputs data
in the format: 10.00. The HP ESA analyzer
outputs data in the format:
+1.00000000E+001.
Selects the position of reference level.