HP ESA-E Series Programmer's Manual page 267

The variable <number> is the sum of the decimal values of the bits that
you want to enable.
Factory Preset
and *RST:
Range:
Questionable Negative Transition
:STATus:QUEStionable:NTRansition <number>
:STATus:QUEStionable:NTRansition?
This command determines what bits in the Questionable Condition
register will set the corresponding bit in the Questionable Event
register when that bit has a negative transition (1 to 0). The variable
<number> is the sum of the decimal values of the bits that you want to
enable.
Factory Preset
and *RST:
Range:
Questionable Power Condition
:STATus:QUEStionable:POWer:CONDition?
This query returns the decimal value of the sum of the bits in the
Questionable Power Condition register.
The data in this register is continuously updated and reflects the
NOTE
current conditions.
Questionable Power Enable
:STATus:QUEStionable:POWer:ENABle <number>
:STATus:QUEStionable:POWer:ENABle?>
This command determines what bits in the Questionable Power
Condition Register will set bits in the Questionable Power Event
register, which also sets the Power Summary bit (bit 3) in the
Questionable Register. The variable <number> is the sum of the
decimal values of the bits you want to enable.
Factory Preset
and *RST:
Range:
Chapter 5
32767 (all 1's)
0 to 32767
0
0 to 32767
32767 (all 1's)
0 to 32767
Language Reference
STATus Subsystem
5-113