Sense:acpower Subsection - HP ESA-E Series Programmer's Manual

Language Reference
SENSe Subsystem

SENSe:ACPower Subsection

Set Adjacent Channel Power Number of Averages
[:SENSe]:ACPower:AVERage:COUNt <integer>
Set the adjacent channel power measurement number of averages.
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
none
Adjacent Channel Power Averaging On/Off
[:SENSe]:ACPower:AVERage[:STATe]OFF|ON|0|1
Turn on or off the adjacent channel power measurement averaging.
Factory Preset
and *RST: Off
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Avg Number On Off
Set Adjacent Channel Bandwidth
[:SENSe]:ACPower:BANDwidth|BWIDth:ACHannel <freq>
Set the adjacent channel bandwidth.
Default Unit: Hz
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Adj Chan BW
Set Main Channel Bandwidth
[:SENSe]:ACPower:BANDwidth|BWIDth:INTegration <freq>
Set the main (center) channel bandwidth.
Remarks: This command is used for measurements in the
MEASURE
Front Panel
Access:
Meas Setup, Main Chan BW
5-70
menu.
menu.
menu.
menu.
Chapter 5