HP ESA-E Series Programmer's Manual page 299

HP 8590-Series
Analyzers
Command(s)
AUNITS
:UNIT:POWer DBM|DBMV|DBUV|V|W
AUNITS? :UNIT:POWer?
AUTO
AUTO :COUPle ALL|NONE
AVG
AXB
:TRACe:EXCHange TRACE1, TRACE2
Corresponding SCPI Command(s) Description/Comments
Specifies amplitude units for input, output,
and display.
Specifies amplitude units for the input, output,
and display for the active window.
Couples the active functions automatically.
The instrument can automatically couple
instrument settings together for accurate
measurements and optimum range. This
command is used to override the coupling for
special measurement needs.
The NONE parameter applies only to the SCPI
language.
Averages trace data.
Exchanges trace A and trace B.
Exchanges TRACE1 (trace A) and TRACE2
(trace B), point by point.