HP ESA-E Series Programmer's Manual page 309

HP 8590-Series
Analyzers
Command(s)
DOTDENS
DRAWBOX
DSPLY
DT
EE
EK
ENTER
EP
ERASE
EXP
Corresponding SCPI Command(s) Description/Comments
Sets the dot density value in the Analog+
display mode.
Draws a rectangular box on the spectrum
analyzer display.
Displays the value of a variable on the
spectrum analyzer screen.
Defines any character as a label terminator.
Enables front-panel number entry. Sends the
controller the values entered on the spectrum
analyzer numeric keypad by the operator.
Allows data entry with the front-panel knob
when the spectrum analyzer is under remote
control.
Allows the spectrum analyzer to receive data
from other devices on the HP-IB.
Enter parameter from front panel. Sends
values entered on the spectrum analyzer
number keyboard to the present active
function value.
Clears trace A and trace B, disposes of the
contents of the user memory, and resets the
state registers and the spectrum analyzer to
the instrument preset state.
Places the exponential of the source in the
destination.