HP ESA-E Series Programmer's Manual page 356

HP 8590-Series
Analyzers
Command(s)
SYNCMODE
TA
TRACe[DATA]? TRACE1
TB
TRACe[DATA]? TRACE2
TDF
TDF A|B|M|I
TDF P
TDF?
TEXT
Corresponding SCPI Command(s) Description/Comments
Selects either the horizontal and vertical
synchronizing constants, or the
synchronization rate for the internal
monitor.
Returns trace A amplitude values from the
spectrum analyzer to the controller.
Returns TRACE1 (trace A) amplitude
values from the spectrum analyzer to the
controller.
Returns trace B amplitude values from the
spectrum analyzer to the controller.
Returns TRACE2 (trace B) amplitude
values from the spectrum analyzer to the
controller.
Formats trace information for return to the
controller.
TDF P is the only supported format. The
queries TRA?, TRB?, and TRC? always
return in TDF P format.
Writes text on the analyzer screen at the
current pen position.