HP ESA-E Series Programmer's Manual page 336

HP 8590-Series
Analyzers
Command(s)
NDBPNTR?
:CALCulate:BWIDth|BANDwidth:RESult?
NRL
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel <rel_ampl>
NRL? :DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel?
OA
OBW
OBWPCT
OL
ONCYCLE
ONDELAY
Corresponding SCPI Command(s) Description/Comments
Returns the bandwidth measured by the N
dB points measurement (NDBPT).
The HP 8590-Series analyzer outputs data
in the format: -1E1. The HP ESA analyzer
outputs data in the format:
-1.00000000E+002.
Sets the normalized reference level.
The HP 8590-series analyzer outputs data
in the format: 10. The HP ESA series
analyzer outputs data in the format:
+1.00000000E+001.
Returns the value of the active function.
Performs the occupied bandwidth
measurement using the value for occupied
bandwidth percent (OBWPCT).
Specifies the percent of total power that is
to be used in calculating the occupied
bandwidth (OBW).
Output current state in learn string
format.
Executes the list of analyzer commands
periodically.
Executes the list of analyzer commands
after the time value has elapsed.