HP ESA-E Series Programmer's Manual page 313

HP 8590-Series
Analyzers
Command(s)
GATECTL
GATECTL [:SENSe]:SWEep:TIME:GATE:TYPE LEVel|EDGE
EDGE|LEVEL
GATECTL? [:SENSe]:SWEep:TIME:GATE:TYPE?
GC
[:SENSe]:SWEep:TIME:GATE:PRESet
Corresponding SCPI Command(s) Description/Comments
Selects between the edge and the level mode
for Option 105, the time-gated spectrum
analysis capability.
Selects between the edge and the level mode
for Option 1D6, the time-gated spectrum
analysis capability.
Level triggers the gate when the signal
surpasses a specific level, set to either low or
high.
Edge triggers the gate when the edge of a
signal is encountered, set to either a
negative-going edge or a positive-going edge.
The HP 8590-Series analyzer returns EDGE or
LEVEL. The HP ESA analyzer returns EDGE
or LEV.
Presets Option 105, the time-gated spectrum
analysis capability.
Presets Option 1D6, the time-gated spectrum
analysis capability.