HP ESA-E Series Programmer's Manual page 316

HP 8590-Series
Analyzers
Command(s)
GETPRNT
:HCOPy[:IMMediate]
GL
GL <value> [:SENSe]:SWEep:TIME:GATE:LENGth <time>
GL UP|DN
GL? [:SENSe]:SWEep:TIME:GATE:LENGth?
GP
GP POS|NEG [:SENSe]:SWEep:TIME:GATE:POLarity NEGative|POSitive
GP? [:SENSe]:SWEep:TIME:GATE:POLarity?
GR
GRAT
GRAT ON|OFF :DISPlay:WINDow:TRACe:GRATicule:GRID[:STATe]
OFF|ON|0|1
GRAT? :DISPlay:WINDow:TRACe:GRATicule:GRID[:STATe]?
HAVE
Corresponding SCPI Command(s) Description/Comments
Initiates output of the spectrum analyzer
display to a printer.
Sets the length of time the gate is open.
Output formats are different.
Sets the polarity (positive or negative) for the
gate trigger.
Returns POS or NEG.
Graphs the given y coordinate while
incrementing the x coordinate by 1.
Turns the graticule on or off.
The HP 8590-Series analyzer outputs ON or
OFF. The HP ESA analyzer outputs 1 or 0.
Used by menus for testing for hardware
configuration.