HP ESA-E Series Programmer's Manual page 296

HP 8590-Series
Analyzers
Command(s)
ACPMK
ACPPAR
ACPSNGLM
ACPSP
ACTDEF
ACTVF
ADD
:TRACe:MATH:ADD <destination_trace>,<source_trace1>,
<source_trace2>
Corresponding SCPI Command(s) Description/Comments
Determines if the graph marker function is
enabled or disabled for the adjacent channel
power (ACP) graph.
Determines if the spectrum analyzer settings
used for the adjacent channel power (ACP),
extended adjacent channel power (ACPE),
channel power (CHP), or occupied bandwidth
(OBW) measurement are set manually or
automatically.
Changes the spectrum analyzer sweep mode to
single sweep, performs a take sweep (TS), and
then performs the previous power
measurement.
Allows you to specify the frequency spacing
between channels.
Creates a user-defined active function.
Returns a "0" if the given function is not active,
a "1" if it is active.
Adds the sources and sends the sum to the
destination.
Performs the math expression and places the
result in the destination trace.
Destination traces are: TRACE[1|2|3]
Expressions consist of:
(<operand><operator><operand>)
Operands are: TRACE[1|2|3]
Operators are: + for addition, − for subtraction