HP ESA-E Series Programmer's Manual page 306

HP 8590-Series
Analyzers
Command(s)
DATEMODE
:DISPlay:ANNotation:CLOCk:DATE:FORMat MDY|DMY
DATEMODE? :DISPlay:ANNotation:CLOCk:DATE:FORMat?
DEMOD
DEMOD AM|FM [:SENSe]:DEMod AM|FM
DEMOD ON|OFF [:SENSe]:DEMod:STATe OFF|ON|0|1
DEMOD? [:SENSe]:DEMod:STATe?
Corresponding SCPI Command(s) Description/Comments
Allows you to set the format for displaying the
real-time clock.
Allows you to set the format for displaying the
real-time clock. To set the date and time use
the command :SYSTem:DATE
<year>,<month>,<day>.
The response output is in the form: MDY or
DMY.
Turns the demodulator on or off, and selects
between AM, FM, or quasi-peak demodulation.
Sets the type of demodulation.
Turns demodulation on or off.
The HP 8590-Series analyzer returns AM, FM
or OFF. The HP ESA analyzer returns 1
(corresponding to the HP 8590-Series response
AM or FM), or 0 (corresponding to OFF).