HP ESA-E Series Programmer's Manual page 325

HP 8590-Series
Analyzers
Command(s)
MF
:CALCulate:MARKer[1]|2|3|4:X?
MIN
MINH
:TRACe[1]|2|3:MODE|MINHold
MINPOS
MIRROR
MKA
MKA? :CALCulate:MARKer[1]|2|3|4:Y?
Corresponding SCPI Command(s) Description/Comments
Returns the frequency (or time) of the
on-screen active marker.
Compares source 1 and 2, point by point, and
stores the lesser of the two in the destination.
Updates trace C elements with minimum level
detected.
Selects the display mode for the selected trace.
Minimum hold displays the lowest measured
trace value for all the data that has been
measured since the function was turned on.
Returns a value, which is the x-axis position (in
display units) of the minimum amplitude value
in trace A, trace B, trace C, or user-defined
trace.
Displays the mirror image of a trace.
Specifies amplitude of the active marker.
Read the current Y value for the designated
marker on the assigned trace. The value is in
the y-axis units for the trace (dBm, volts, and
so forth).
The HP 8590-Series analyzer outputs data in
the format: -66.9. The HP ESA analyzer
outputs data in the format: -6.69000000E+001.