HP ESA-E Series Programmer's Manual page 324

HP 8590-Series
Analyzers
Command(s)
MEAN
MEAN TRA? :TRACe:MATH:MEAN? <trace>
MEAN TRB?
MEAN TRC?
MEANTH
MEASOFF
MEASURE
MEM
MENU
MERGE
Corresponding SCPI Command(s) Description/Comments
Returns the mean value of the given trace in
measurement units.
Returns the mean of the amplitudes of the
trace amplitude elements in measurement
units. The format of the response data will be
different.
Traces are: TRACE[1|2|3]. TRACE1
corresponds to trace A, TRACE2 corresponds to
trace B, and TRACE3 corresponds to trace C.
Returns the mean value of the given trace
above the threshold, in measurement units.
Turns off the current measurement, erases the
display, and then displays the menu accessed
by MEAS/USER.
Determines the type of measurement: signal
analysis, stimulus response, or signal
normalization.
Returns the amount of spectrum analyzer
memory available.
Selects and displays the softkey menus on the
spectrum analyzer screen.
Merges the source trace into the specified area
of the destination trace.