HP ESA-E Series Programmer's Manual page 323

HP 8590-Series
Analyzers
Command(s)
LOAD
:MMEMory:LOAD:STATe <reg_number>,<file_name>
:MMEMory:LOAD:TRACe TRACE1|TRACE2|TRACE3,
<file_name>
LOG
LSPAN
[:SENSe]:FREQuency:SPAN:PREVious
M4
MDS
:FORMat: [:TRACe][:DATA]
ASCii|INTeger,32|REAL,32|REAL,64
MDU
Corresponding SCPI Command(s) Description/Comments
For loading a trace, amplitude correction, limit,
or state.
For loading the analyzer state from a file.
For loading a trace.
Takes the logarithm (base 10) of the source,
multiplies the result by the scaling factor, then
stores it in the destination.
Changes the spectrum analyzer span to the
previous span setting.
Activates a single marker on the trace and
enables the knob to change the position of the
marker. The active function is then set to span.
Specifies measurement data size as byte or
word.
Specifies the measurement data size in SCPI.
Returns values for the spectrum analyzer
baseline and reference level.