HP ESA-E Series Programmer's Manual page 311

HP 8590-Series
Analyzers
Command(s)
FFTMM
FFTMS
FFTOFF
FFTPCTAM
FFTPCTAMR
FFTSNGLS
FFTSTAT
FFTSTOP
Corresponding SCPI Command(s) Description/Comments
Changes the FFT mid-display frequency of the
spectrum analyzer to the frequency of the FFT
marker.
Changes the FFT stop frequency of the
spectrum analyzer to the frequency of the FFT
marker.
Exits the fast Fourier transform (FFT)
measurement and FFT settings.
Turns the percent AM function on or off.
during an FFT measurement.
Returns the percent of amplitude
modulation(AM).
Changes the spectrum analyzer sweep mode to
single sweep mode (if necessary), and then
performs a fast Fourier transform (FFT) on
trace A.
Returns the status of the spectrum analyzer
FFT measurement functions.
Sets the FFT stop frequency of the FFT
measurement.