HP ESA-E Series Programmer's Manual page 345

HP 8590-Series
Analyzers
Command(s)
RMS
ROFFSET
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet
<rel_ampl>
ROFFSET? :DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet?
RQS
SAVEMENU
Corresponding SCPI Command(s) Description/Comments
Returns the root mean square value of the
trace in measurement units.
Offsets all amplitude readouts without
affecting the trace.
Sets the amplitude reference level for the
y-axis. When no window is specified, the
active window is assumed.
The HP 8590-Series analyzer outputs data
in the format: 10.00. The HP ESA analyzer
outputs data in the format:
+1.00000000E+001.
Sets a bit mask for service requests.
Saves menu 1 under the specified menu
number.