HP ESA-E Series Programmer's Manual page 388

602
Floppy disk error
An unknown error has occurred while accessing the
floppy disk.
601
Floppy disk full
The floppy disk is full. Clear some space by deleting
unwanted files.
618
Illegal write access of Flash memory
Attempt to write to an unavailable area of internal
flash memory.
763
Incorrect filename, allowable extensions are
.gif or .wmf
Attempt to save a screen image to a file with an
incorrect extension.
762
Incorrect filename, allowable extensions are
.trc or .csv
Attempt to save a trace to a file with an incorrect
extension.
751
Instrument state may be corrupt, state has
been reset to initial values
An error in the internal instrument state has been
detected. The state has been reset to a default value.
216
Invalid Baud Rate
Attempt to use invalid baud rate. Refer to manual for
valid rates.
701
Invalid printer response
In attempting to identify the printer an invalid
response was received. Check that you are using a
supported printer. Be sure you are using the proper
cable and that it is securely fastened.
Chapter 7
Error Messages
201 to 799: Device-Specific Errors
7-21