Table of Contents
Advertisement
Notes
-1- Save the file (Setup.exe) to a temporary directory on
-2- To start installing
-3- To complete the installation follow the instructions
Connecting AuroraPresto to a PC
Notes
The Ethernet port settings on
must have the same settings with the exception of the
Source IP Address (Src).
For Software Version 1.05 or earlier the DGW, Msk, and IP
Type on
settings. See
For Software Version 1.07 or later the DGW, Msk, IP Type,
IP Encap, IP Mode and HDR Compression on
AuroraPresto
Setting up the IP Address
For Software Version 3.xx or later Download mode sets the
DGW, Msk, IP Type, IP Encap, IP Mode and HDR
Compression automatically on
must have the same settings. See
- Software Version 2.80 or Later
Caution
If you change the Ethernet port settings or IP Addresses on
your PC your settings may conflict with other equipment
connected to the PC.
Issue 7 - 05/02
•
If you have an existing version of
AuroraExchange
it before installing
•
You must have
later installed on your PC.
your PC.
Setup.exe is a self extracting installation file for the
software download application
Setup.exe.
displayed on the screen.
AuroraPresto
Setting up the IP Address
and the PC must have the same settings. See
Setting up AuroraPresto
on your PC you must uninstall
AuroraExchange.
AuroraExchange
AuroraExchange.
AuroraExchange
, double-click on
AuroraPresto
and the PC must have the same
on page 3-44.
on page 3-45.
AuroraPresto
Setting up AuroraPresto
on page 3-47.
version 2.20 or
and the PC
. The PC
3-43
Advertisement
Table of Contents
