Starting a Route Trace
-1- From the Select Test Mode screen select Manual
-2- Select IP Layer and press ENTER to display the
-3- Choose Route Trace to display the following screen.
Press F3 IP Adr to display the WAN Address screen.
Press F4 IP Setup to display the Route Trace Setup
screen.
Displaying the Router Stats
-1- From the Select Operation screen select IP Layer
-2- Select Router Stats to display the Router Stats
Issue 7 - 05/02
Tests to display the Select Operation screen.
IP Tests screen.
and press ENTER to display the IP Tests screen.
screen.
Section 7 - IP Layer Tests
4-89