Table of Contents
Advertisement
AuroraPresto—User Guide
Setting the parity configuration
You need to set the
serial port to suit the device to which it is connected.
Note
This setting must be the same on both
connected device.
-1- Select Parity from the Serial Setup menu.
-2- Highlight the option you require and press ENTER.
None
Odd
Even
Including stop bits
Stop bits
to indicate that the message is complete. You can transmit
either 1 or 2 stop bits, to suit the device to which it is
connected.
Note
This setting must be the same on both
connected device.
3-10
parity
The options are:
are the last bits sent in asynchronous transmission,
configuration of
AuroraPresto
Parity Bit
Do not use Parity.
Use odd Parity.
Use even Parity.
AuroraPresto
AuroraPresto
's
and the
and the
481801
Advertisement
Table of Contents
