The following diagram shows the point where you can
connect
test.
Ethernet or
ATMF 25.6
DTE
AuroraPresto
replacing ADSL
Remote Modem
In-line Modem Replacement Mode
OR
Ethernet or
ATMF 25.6
DTE
In-line Modem Replacement Mode
For key see
When
can be connected to the ADSL line and can test a DTE
Ethernet or ATM 25 interface sending or receiving IP or
other user traffic.
Setting up AuroraPresto for Golden Modem
Tests
To enable you to perform a Golden Modem Test you
must:
-1- Synchronise the DSL, see page 4-34.
-2- Set up ATM VCs, see page 4-52.
-3- Set up the data ports, see
Issue 7 - 05/02
AuroraPresto
ADSL Line
(copper pair)
(ATU-R)
ADSL Line
(copper pair)
Modem
(ATU-R)
diagram
AuroraPresto
on page 4-73.
Section 2 - DSL Testing Techniques
to perform a Golden Modem
ATU-C
ATU-C
CO
ATU-C
DSLAM
Ethernet or
ATMF 25.6
AuroraPresto
replacing ADSL
central office modem
(ATU-C)
on page 4-10.
is simulating the ADSL modem, it
Setting up the Data Port
ATM
DTE
4-15