Performing Open And Short Correction; Connecting The 16034H - Agilent Technologies 16034H Manual

Operation

Performing Open and Short Correction

Performing Open and Short Correction
To enhance measurement accuracy, open and short correction should be done before DUT
measurement. The following procedure shows correction and measurement by the 16034H.
CAUTION Take care to avoid rough handling and never allow any mechanical shock to the 16034H,
especially against the contact pins from the sides or any to the parts mounted on top of the
fixture.

Connecting the 16034H

1. Set the cable length to 0 m in the instrument.
2. Connect the 16034H directly to the UNKNOWN terminals as shown in Figure 2-1.
Figure 2-1 Connecting the 16034H
14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 2