Table of Contents
Advertisement
AuroraPresto—User Guide
-1- Use the UP and DOWN keys to select VPI from the
-2- Enter a VPI number between 0 and 255.
Setting up a VCI for the BERT
-1- Select VCI from the BERT setup menu to display an
-2- Enter a VCI number between 0 and 65535.
Setting up BERT%
The BERT VC is a dedicated VC and not one of the four
ATM Layer Test VCs. It shares the same bandwidth pool as
the four VCs. It can be used to transmit data above its
selected available bandwidth when one or more of the four
VCs is not transmitting data.
Note
If the ADSL BERT% is set to 100% then none of the four
ATM Layer Test VCs will be suitable for carrying data
while the test is being performed.
-1- Select DSL BW% from the BERT setup menu to
-2- Enter a BERT% between 1 and 100.
4-64
BERT setup menu to display an entry window.
entry window.
display an entry window.
481801
Advertisement
Table of Contents
