Table of Contents
Advertisement
-1- Select Duration from the BERT setup menu to display
-2- Select one of the following and press ENTER.
To set a custom (User Defined) test length:
-1- From the BERT setup menu select Duration, choose
-2- Select User Def and press ENTER.
-3- Enter the duration in hours, minutes and seconds (two
Setting up a VPI/VPC for the BERT
You can set up a dedicated VPI/VCI for the ATM BERT.
Note
The VPI/VCI that you enter for the ATM BERT must not be
the same as any of the four VPI/VCIs set up for the ATM
Layer.
Issue 7 - 05/02
the options.
Continuous—the test runs until you stop it.
•
Continuous BERT does not need a fail rate,
so the Threshold setting is removed.
•
the test length you require from 1 minute, 15
minutes or 1 hour.
User Defined—set a custom test length.
•
AuroraPresto
window.
User Defined and press ENTER. The User Def
window is displayed in the BERT setup menu.
digits for each), and press ENTER. The maximum
duration you can enter is 99:59:59.
Section 5 - ATM Layer Tests
displays a User Def setting
4-63
Advertisement
Table of Contents
