Table of Contents
Advertisement
AuroraPresto—User Guide
-2- Select Type and press ENTER to display the following
-3- Choose the Modem Type you want according to the
Connecting AuroraPresto to a Modem for DSL
Layer Tests
To be able to run a DSL Layer Test, you must set up the DSL
layer to be connected.
The following text assumes you have selected DSL tests.
-1- From the Select Test Mode screen select Manual
Note
The PPP Layer option is displayed only when a PPP
protocol has been selected. Press F1 Protocol to display the
PPP Setup menu.
See
Setting up PPP Options
-2- Press F3 to begin connecting to a modem.
4-34
screen.
Interface card.
See
Setting up the Modem for ADSL Tests
11 for details on setting up the Mode, Training and
Tracer options.
Tests to display the Select Operation screen.
AuroraPresto
performs 3 stages to connect to a
modem. The status is displayed in the top right-hand
corner.
on page 3-26.
on page 3-
481801
Advertisement
Table of Contents
