Section
Basic Operations
3
3
This section is intended for beginners, and explains some
simple operations that you are likely to perform frequently
while using your
Adjusting the Volume
To switch the loudspeaker on or off, press the key located
on the right-hand side above the screen. The default is on.
Note
When you switch the loudspeaker on, the last entered
volume setting is used.
You can change the volume of the loudspeaker.
To adjust the volume:
-1- Press
-2- Change the volume to the level you require. To
Issue 7 - 05/02
AuroraPresto
•
adjust the volume of the loudspeaker
•
select an interface for testing
•
choose the operating mode
•
enter alphanumeric information (e.g. names to
identify stored test results).
AuroraPresto
+ 3.
indicating the current volume.
increase by one step, press
one step, press
Section 3 - Basic Operations
. You will learn how to:
displays a bar graph
or
or
.
. To decrease by
2-15