Setting The Screen Backlight Power-Off Time Delay; Changing The Date/Time On The Internal Clock - Agilent Technologies AuroraPresto User Manual

Setting the Screen Backlight Power-Off Time Delay

When
backlight on its LCD screen switches off to save power if
the ASDL layer is not active and no keys have been pressed
after a certain length of time. You can change the time delay
before the backlight switches off, although you cannot
disable the feature entirely.
-1- Select LCD Backlight from the System Setup menu
-2- Highlight your choice and press ENTER to close the
-3- Press ESC to save your selection and close the

Changing the Date/Time on the Internal Clock

AuroraPresto
(Real-Time Clock) which is used to time-stamp decodes and
test results.
To change the time
-1- From the System Setup menu, select Time to display
-2- Enter a time in hours, minutes and seconds, using the
-3- Press ENTER to save the new time and exit.
Issue 7 - 05/02
AuroraPresto
is operating from batteries, the
to display the following:
option window.
System Setup menu.
has an internal clock/calendar
a time entry window:
24-hour clock. To enter each digit, move the cursor to
the required position and type the digit. The new digit
replaces the one already in that position.
Setting up AuroraPresto
3-33