Table of Contents
Advertisement
Choosing the duration of the test
You can vary the length of time you want the BERT to run.
-1- Select Duration from the BERT setup menu to display
-2- Select one of the following and press ENTER.
To set a custom (User Defined) test length:
-1- From the BERT setup menu select Duration, choose
-2- Select User Def and press ENTER.
Enter the length in hours, minutes and seconds (two digits
for each), and press ENTER. The maximum length you can
enter is 99:59:59.
Issue 7 - 05/02
the options.
Continuous—the test runs until you stop it.
•
Continuous BERT does not need a fail rate, so
the Threshold setting is removed.
•
the test length you require from 1 minute, 15
minutes or 1 hour.
User Defined—set a custom test length.
•
AuroraPresto
window.
User Defined and press ENTER.
The User Def window is displayed in the BERT setup
menu.
displays a User Def setting
Section 6 - Datalink
4-77
Advertisement
Table of Contents
