Table of Contents
Advertisement
AuroraPresto—User Guide
TDR Tester
Warning
When connecting to the line, especially when using
crocodile clips, special care must be taken as high voltages
may be present on the line and there may be a danger of
electrocution. Extra care should be taken especially when
using
Caution: TDR/DMM Tests
When performing Capacitance and Load Coil tests make
sure that voltage is NOT present on the line, if a voltage is
present on the line you may damage
The Current test is intended for low DC current
measurement only. It is protected by a 400mA fuse.
The TDR/DMM module has protection devices fitted at
manufacture that cannot be reset by the user. If the
protection devices are activated
returned to Agilent Technologies for repair.
Your
because your organisation has not bought it.
For details contact your Agilent Technologies
representative.
4-24
AuroraPresto
in TDR/DMM mode.
AuroraPresto
may not have the TDR Tester option
AuroraPresto
AuroraPresto
must be
.
481801
Advertisement
Table of Contents
