Table of Contents
Advertisement
AuroraPresto
Setting the baud rate
The
baud rate
the serial port.
To set the baud rate:
-1- Select Baud rate from the Serial Setup menu to
-2- Highlight your choice and press ENTER.
Setting the character length of serial port data
You need to specify a character length of either 7 or 8 bits
for the serial port data, depending on the device to which
you intend to connect your
Note
This setting must be the same on both
connected device.
-1- Select Data bits from the Serial Setup menu.
-2- Choose either 7 or 8 and press ENTER.
Issue 7 - 05/02
's RS232 port can be used:
•
to print test results
•
to output results of a BERT as it is performed
•
to print information from a test that has been
AuroraPresto
saved to
is the rate at which data is transmitted over
display a list of possible rates, in kilobits per second:
Setting up AuroraPresto
's memory.
AuroraPresto
.
AuroraPresto
and the
3-9
Advertisement
Table of Contents
