Section
Datalink
6
6
Setting up the Data Port
-1- From the Main Setup screen select Data Port.
-2- Select Data Connect and press ENTER to display the
Choose the Data Port interface you want to use.
Choose either 10BT or ATM 25.
ATM25 Interface
If your
interface,
ATMF25.6 data port.
The ATM 25.6 interface card carries ATM traffic up to 25.6
Mbits/s. You can produce full bandwidth testing results
statistics by performing an ATM 25
Issue 7 - 05/02
Data Port Connection screen.
AuroraPresto
is fitted with the optional ATM 25.6
AuroraPresto
ATM 25
can simulate a DTE using an
BERT.
Modem
(ATU-R)
Section 6 - Datalink
4-73