Table of Contents
Advertisement
Testing in Auto Test Mode
When you start an Auto Test,
session. These test results can be stored or printed in either
text or graphical format. See
page 4-8.
-4- From the Select Tests screen, press F1 Start to start
-5- The following screen is displayed during the test.
If you want to stop the test, press F1 Abort.
The following screen is displayed when the test has finished.
Indicates that the test was selected in the Auto Test profile
and the test has failed.
Indicates that the test was selected in the Auto Test profile
and the test has passed.
Indicates that the test was not selected in the Auto Test
profile.
Issue 7 - 05/02
the Auto Test session.
A progress bar is displayed to indicate that the test is
running. This can take a few minute.
Section 1 - Test Modes
AuroraPresto
creates a results
Printing Auto Test Results
on
4-7
Advertisement
Table of Contents
