Switching Aurorapresto On And Off; The Welcome Screen; Changing The Appearance Of The Screen; Changing The Contrast - Agilent Technologies AuroraPresto User Manual

Switching AuroraPresto On and Off

Press the key and hold it down for 1-2 seconds.
When you switch off,
system settings.

The Welcome Screen

When you switch on
displayed briefly.
The Select Test Mode menu is displayed after the
Welcome screen. From the Select Test Mode menu you
can select an interface, access the setup menus or begin
testing. For more details about the Select Test Mode
menu, see

Changing the Appearance of the Screen

You can make the display easier to read in different lighting
conditions by changing the contrast or switching the
backlight on and off.

Changing the Contrast

-1- Press and hold
-2- Change the contrast to the level you require. To
-3- To choose the currently displayed contrast and close
Issue 7 - 05/02
AuroraPresto
The Select Test Mode Menu
graph indicating the current contrast.
increase or decrease by one step, press
increase or decrease by 10 steps, press
the adjustment window, press ENTER.
Section 1 - Preparing to Use AuroraPresto
AuroraPresto
stores the current
, a Welcome screen is
on page 2-11.
AuroraPresto
+ 1. displays a bar
or . To
or .
2-7