Table of Contents
Advertisement
-3- Press ENTER to accept your entry.
If additional VCs are used, press F1 Next and repeat steps
2 to 3 above.
Note
The MAC learning bridge sets up a MAC/IP relationship for
any VC or 10 Base T destination that you enable. If you
disable any of these destinations, the MAC learning bridge
will retain the existing MAC/IP relationship until 15
minutes of inactivity has passed. After 15 minutes the MAC
learning bridge will clear the MAC/IP relationship it has
learned.
Displaying ATM Layer Test Results
-1- From the Select Test Mode screen select Manual
-2- Select ATM Layer and press ENTER to display the
ATM Global Statistics
Note
ATM Global Stats displays the statistics for all ATM cells
recognised by
Issue 7 - 05/02
Tx Rate%—There are four VCs available for
•
data transfer. These four VCs share the available
bandwidth. Each VCs transmission rate can be
set between 0 and the remaining available
bandwidth. The sum of the four VCs bandwidth
cannot exceed 100%.
the remaining available bandwidth to prevent
the bandwidth availability exceeding 100%.
Tests to display the Select Operation screen.
ATM Tests screen.
AuroraPresto
Section 5 - ATM Layer Tests
AuroraPresto
.
calculates
4-53
Advertisement
Table of Contents
