Setting Up The Modem For Adsl Tests - Agilent Technologies AuroraPresto User Manual

-1- Select Stop bits from the Serial Setup menu to
-2- Choose either 1 or 2 and press ENTER.
Using XON/XOFF flow control
XON/XOFF
flow between
connected. It allows the other device to stop and restart the
flow of data it is receiving from
-1- Select XON/XOFF from the Comms/Tracer menu to
-2- Choose either On or Off and press ENTER.
Note
It is usually best to set XON/XOFF to On, on both
AuroraPresto

Setting up the Modem for ADSL Tests

Before you can perform Tests you must select the Modem
Type and set up the modem Options. See
Interface Cards or Modules
-1- From the Main Setup Menu select Modem and press
Issue 7 - 05/02
display an option window:
is a protocol which controls asynchronous
AuroraPresto
display the options:
and the connected device.
ENTER to display the Modem Setup screen.
Setting up AuroraPresto
and the device to which it is
AuroraPresto
Displaying
on page 2-16 for information.
.
3-11