Table of Contents
Advertisement
Entering the Source IP address, Default
Gateway, Mask IP address and Domain Name
Server address
-1- Select Adr
-2- Enter the required value.
-3- Press ENTER.
Note
The above options consist of 4 groups of 3 digits divided by
a dot. The maximum number you can enter in each group
is 255.
Setting up IP Framing
-1- Select Framing from the IP Setup screen to display
IP Type
IP Encap
IP Mode
Hdr Compression Use this to enable or disable IP Header
Issue 7 - 05/02
DGW or Msk from the WAN Setup
,
screen. A screen similar to the following is displayed.
The dot is entered automatically. You can enter a new
number or accept the current setting.
the Framing Setup screen.
Use this to set up the Standard for
Ethernet message formats.
Use this to select the Ethernet
encapsulation method.
Use this to select the IP operation
mode.
compression.
Setting up AuroraPresto
3-21
Advertisement
Table of Contents
