Table of Contents
Advertisement
-2- Choose Auto or Manual.
-3- Press ENTER to accept the entry and return to the
-4- Choose Attempts and press ENTER.
-5- Enter a number between 1 and 25.
Note
Init Mode and Attempts are only displayed if you have set
IP Mode to PPP.
Setting up the Authentication Method
Before you begin a PPP session, you must set up the
Authentication Method.
-1- Select Authentication from the PPP Setup menu.
-2- Choose
-3- Press ENTER to accept the entry.
Setting up the User Name
-1-
-2- Enter a User Name (up to 40 characters). See entering
Issue 7 - 05/02
The default is Auto.
PPP Setup menu.
The default is 1.
A screen similar to the following is displayed.
PAP
(Password Authentication Protocol) or
CHAP
(Challenge Handshake Authentication
Protocol) if you want to use passwords or user names.
Select User from the PPP Setup menu.
A screen similar to the following is displayed.
Entering Alphanumeric Information
information on entering alphanumeric information.
Setting up AuroraPresto
on page 2-16 for
3-29
Advertisement
Table of Contents
