Table of Contents
Advertisement
AuroraPresto—User Guide
Notes
The IP address allocated using IPCP, is set to zero at the end
of a PPP session.
-1- From the WAN Address screen select Origin and
-2- Choose Specify to select a Source IP Address.
Note
If you have chosen IPCP as the origin, the source address is
set to Src: Acquire Mode in the IP Setup menu.
To display the actual IP Address supplied, press
display the Status screen.
-3- Press ENTER to accept the entry.
Note
AuroraPresto
currently selected one is unsuccessful. The successful
IP Type will also be displayed in the Status screen.
Checking the Current Setup of AuroraPresto
See
page 3-41.
You can also access the IP Address Setup menu from the
Select Tests screen.
See
Setting up the IP Ping Test
3-20
press ENTER.
A screen similar to the following is displayed.
OR
choose IPCP to request a IP Address allocated by the
network.
will try to use the alternative IP Type if the
on page 4-86.
+ 5 to
on
481801
Advertisement
Table of Contents
