Table of Contents
Advertisement
Section
Preparing to Use
1
1
This section covers information you need to know before
you start using
Before you start, you need to connect
external power source if you require one (this is usually the
mains electricity supply). Then you need to connect to the
interfaces on which you intend to test.
Tip
You will find more information about the power sources in
Chapter 6. For details of the required voltage/frequency, see
the power supply specifications in
page 7-4.
Connecting to an External Power Source
-1- Plug
-2- Fit the power supply's connector into the external
-3- Switch on the external power source.
Issue 7 - 05/02
AuroraPresto
AuroraPresto
AuroraPresto
•
connecting
•
how to change the screen contrast and lighting
AuroraPresto
power socket which is easily accessible.
power supply socket on
below.
Section 1 - Preparing to Use AuroraPresto
. It includes details about:
and switching it on
AuroraPresto
Power supplies
's power supply unit into a nearby
AuroraPresto
to an
on
, as shown
2-3
Advertisement
Table of Contents
