Table of Contents
Advertisement
AuroraPresto—User Guide
DGW
Msk
DNS
Entering the Source IP address, Mask IP
address
-1- Select Adr or Msk from the LAN Address screen. A
-2- Enter the required value.
-3- Press ENTER.
Note
The above options consist of 4 groups of 3 digits divided by
a dot. The maximum number you can enter in each group
is 255.
-4- Press F4 Setup to return to the Main Setup screen.
Note
The above options consist of 4 groups of 3 digits. The
maximum number you can enter in each group is 255.
Setting up the WAN Address
This option is used to set up
WAN (ADSL) side of the network.
This option is only available if you have set up the IP Mode
to Routed.
3-18
This displays the Default Gateway
from the WAN setup.
Use to enter the LAN IP Mask. The IP
Mask separates the network address
from the host address.
This displays the Domain Name
Server IP address from the WAN
setup.
screen similar to the following is displayed.
The dot is entered automatically. You can enter a new
number or accept the current setting.
AuroraPresto
's address on the
481801
Advertisement
Table of Contents
