Table of Contents
Advertisement
Max TTL
Timeout (ms)
Setting up the IP Options
The IP (Internet Protocol) Address is an address allocated to
a specific internet location. ADSL uses the IP address to
send data to, or receive data from a specific internet
location.
-1- From the Select Test Mode screen press F4 Setup to
-2- Select IP.
-3- Press ENTER.
Mode
Issue 7 - 05/02
Maximum Time to Live. Use this to set
up the maximum TTL value. Enter a
value between 1 and 75.
Time to Live, sometimes known as
hop count, is a value that is set by the
device that sends the Ping message.
The value is decremented by each IP
network router device that the
message passes through. When the
value = 0 the IP packet is deleted from
the network. This prevents un-routed
packets remaining in the network any
longer than necessary.
Use this to set up the time to wait for
a response from a specified router
before terminating the test. Enter a
value between 500 and 5000ms.
display the Main Setup screen.
The IP Setup screen is displayed.
Choose Bridged, Routed or PPP. If
your
PPP Option, Mode is always set to
Bridged.
Setting up AuroraPresto
AuroraPresto
does not have the
3-15
Advertisement
Table of Contents
