AuroraPresto—User Guide
DMM Measurement Tests
You can set up a ±% variance threshold that is used to set
up the exception points on the chart.
Setting up DMM Tests
-1- From the Select Test Mode screen, choose
-2- Select DMM test and press F2 Param to display the
Max DCV (±):
Min DCV (±):
Max Res:
Min Res:
4-22
Auto Tests and press enter to display the Select
Tests screen.
DMM Test Mode screen.
Enter the maximum ± DC Volts range
from 1 to 400.
Enter the minimum ± DC Volts range
from 1 to 400.
Enter the maximum resistance range
from 0 to 1 MOhm.
Enter the minimum resistance range
from 0 to 1 MOhm.
481801